HOW TO MAKE UTORRENT FASTER USING PROTOCOL
ENCRYPTION
Since I am using uTorrent, I will describe this in separate
steps for both uTorrent users and other client users. Protocol Encryption makes
it to where your ISP can not identify torrent traffic, which decreases the
chance of them throttling, or limiting your bandwidth while downloading
torrents. uTorrent Users: Be sure that everything I have checked is
checked on your client. Most of this comes by default. The most important thing
here is “Protocol Encryption.” Be sure this is set to Enabled, and that “Allow
incoming legacy connections” is checked. Other Torrent Clients: In your settings (most likely under
connections), there will be something along the lines of “Protocol Encryption,
Transport Encryption, or Traffic Shaping.” Enable these settings and allow
incoming legacy connections.
HOW TO MAKE UTORRENT FASTER USING BANDWIDTH
Users can increase their Utorrent client’s performance in
order to make downloading and uploading files faster. In order to this try the
following: 1) Open the Utorrent client, click on the Options tab, and
select Preferences. 2) Select the Connections tab and enter “45682” into the
“Port used for incoming connections” box. 3) Scroll to the bottom of that same window and enter “65”
into the “Global maximum upload rate” box and “0” into the “Global maximum
download rate” box under “Bandwidth Limiting.” 4) Open the Utorrent/BitTorrent tab and enter “1890” into
the “Global maximum number of connections” box, “2329” into the “Maximum number
of connected peers per torrent” box, and “14” into the “Number of upload slots
per torrent” box. Be sure to select every box on this screen and ensure that
the Outgoing Protocol Encryption is set to “Enabled.” 5) Click on the Queueing tab and enter “60” into the box for
number of active torrents and “63” into the box for number of active downloads.
Ensure that the Seed Ratio is set to 100% and uncheck every box on this screen. 6) Click Apply on the bottom of the window and restart
Utorrent. The program should now be much faster
HOW TO MAKE UTORRENT FASTER USING ADVANCED SETTINGS
Now it’s time to change some “Advanced” settings. In
settings/preferences, click on advanced. It says “Warning: Do not modify” but
if you follow exactly what I do, your client will be safe. Again this can be
done in any Torrent Client, but you have to understand what the settings mean
as they may be worded differently. uTorrent: You can use the filter (search box) to quickly
find certain settings. Set “bt.allow_same_ip” to ‘True’ by clicking on it and
setting the value to true. (see picture for example.) Set “gui.show_notorrents_node” to ‘False’ (Use filter or
scroll down in Advanced to find it.) Set “rss.update_interval” to ’20’ (Make sure you click on
‘Set’ after you type in 20) Apply and close out of Advanced settings. Restart uTorrent
or torrent client.
Post a Comment